Endress+Hauser Soliwave FDR16, Руководство по эксплуатации

Страница: 26 / 40

26
Soliwave FDR16/FQR16
Hauser
Repair
9 Diagnostics and troubleshooting
Error Possible cause Remedy
Device does not
respond
Supply voltage does not match the
specification on the nameplate
Apply correct voltage
Supply voltage has the wrong
polarity
Reverse the polarity of the supply
voltage
No communication
between FDR16 and
FQR16 (FDR16 green
LED off)
Connecting cable not connected Connect connecting cable
Connection cable has no contact Check connecting cable
Signal outputs do not
switch
Microwave barrier not
parameterized
Parameterize FDR16 (if
necessary, reset to factory settings
beforehand).
FDR16 and/or FQR16 defective Inspection and repair if necessary
10 Maintenance
No special maintenance work is required.
10�1 Cleaning
The device must be cleaned if necessary (for example, removal of product caking), but do
not damage the transmission window.
11 Repair
No repair is provided for this device.
11�1 Return
The measuring device must be returned if the wrong device has been ordered or delivered.
As an ISO-certified company and also due to legal regulations, Hauser is obli -
ged to follow certain procedures when handling any returned products that have been in
contact with medium. To ensure safe, swift and professional device returns, please refer
to the procedure and conditions for returning devices provided on the Hauser
website at
http://www.endress.com/support/return-material
11�2 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), our products are marked with the depicted symbol in order to minimize the dis-
posal of WEEE as unsorted municipal waste.
Such products may not be disposed of as unsorted municipal waste and can be returned to
Hauser for disposal at conditions stipulated in our General Terms and Conditions
or as individually agreed.