Endress+Hauser Solitrend MMP42, Краткое руководство по эксплуатации

Страница: 19 / 28

Solitrend MMP42 Operating options
Hauser 19
7 Operating options
1 2 3
4
5
6
7
IMP-Bus RS485
A0040211
 12 Overview
1 Round sensor, short
2 Round sensor, middle
3 Rectangular sensor
4 Remote display
5 Computer
6 LED display
7 PLC or water dosing computer
8 Commissioning
8.1 Analog outputs for measured value output
The measured values are output as a current signal via the analog output. The sensor can be
set to 0 to 20 mA or 4 to 20 mA.
Output 1 can be scaled at the factory, or can be subsequently scaled individually (user-
defined setting) using the remote display (optionally available), e.g. 0 to 10 %, 0 to 20 %
or 0 to 30 %
• Output 1: moisture in % (variably adjustable)
• Output 2: conductivity 0 to 20 mS/cm or temperature 0 to 100 °C (32 to 212 °F), this also
applies for the high-temperature version.