Endress+Hauser Solitrend MMP42, Краткое руководство по эксплуатации

Страница: 16 / 28

Electrical connection Solitrend MMP42
16 Hauser
6 Electrical connection
6.1 Connection conditions
6.1.1 Cable specification
Connecting cables are available in different versions and lengths (depending on design).
Device with 10-pin connector
Connecting cables with a pre-assembled 10-pin socket on the device side are available in
different standard lengths:
• 4 m (13 ft)
• 10 m (32 ft)
• 25 m (82 ft)
UNITRONIC PUR CP shielded cable, twisted pairs 6 × 2 × 0.25 mm 2 , PUR sheath resistant to
oils and chemicals.
Rectangular sensors
Standard lengths (fixed cable):
• 5 m (16 ft)
• Cable lengths of 1 to 100 m (3 to 328 ft) are possible upon request
UNITRONIC PUR CP shielded cable, 10 × 0.25 mm
2
, PUR sheath resistant to oils and
chemicals.
6.2 Connecting the measuring device
6.2.1 Terminal assignment
Round sensors
Round sensors are supplied as standard with a 10-pin connector with IP67 protection.
In the high-temperature version 0 to 120 °C (32 to 248 °F), the sensor is separated from
the electronics unit via a HF cable. The electronics housing is equipped on both sides
with connectors with IP67 protection.