Endress+Hauser Soliswitch FTE20, Руководство по эксплуатации

Страница: 8 / 32

Identification Soliswitch FTE20
8 Hauser
3 Identification
3.1 Nameplate
Soliswitch Made in Germany 2012 87484 Nesselwang
Ord. cd.: FTE20-xxxx/xx
Ext. ord. cd.: FTE20-XXXXXXXXXXXX
230VAC 3,5VA
Ta= -20°C ... + 60°C
IP66
Ser. no.: XXXXXXXXXXX
DMT01 ATEX E 040
II 1/3D T110°C
contact ratings max.
250VAC / 6A
1
2
3
4
5
6
8
7
A0017317
å 1 Nameplate of the Soliswitch FTE20 (example)
1 Order code
2 Serial number
3 Extended order code
4 Power supply and IP protection of the housing
5 Ambient temperature range
6 Approvals
7 Output
8 Year of manufacture and manufacturer's address
3.2 Certificates and approvals
An overview of all the approvals available is provided in the "Technical data" section.
CE mark, Declaration of Conformity
The device is designed to meet state-of-the-art safety requirements, has been tested, and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations in accordance with EN 61010-1 "Safety requirements for electrical
equipment for measurement, control and laboratory use".
The device described in these Operating Instructions therefore complies with the statutory
requirements of the EU Directives. The manufacturer confirms that the device has been
successfully tested by applying the CE mark.