Endress+Hauser RN22, Руководство по эксплуатации, Страница: 24 / 40

Technical data RN22
24 Hauser
12.11 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Hauser sales center or on the product page of the
Hauser website: www.endress.com .
Device-specific accessories
Type Order code
DIN rail bus connector 12.5 mm (x 1) 71505349
System power supply RNB22
Power and error message module RNF22
Service-specific accessories
Accessories Description
Configurator Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information
such as measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output
format
• Ability to order directly in the Hauser Online Shop
The Configurator is available on the Hauser website at:
www.endress.com
-> Click "Corporate" -> Select your country -> Click "Products" -> Select the product
using the filters and search field -> Open product page -> The "Configure" button to
the right of the product image opens the Product Configurator.
Accessories Description
W@M Life cycle management for your plant
W@M offers assistance with a wide range of software applications over the entire
process: from planning and procurement to the installation, commissioning and
operation of the measuring devices. All the relevant information is available for
every measuring device over the entire life cycle, such as the device status, device-
specific documentation, spare parts etc.
The application already contains the data of your Hauser device.
Hauser also takes care of maintaining and updating the data records.
W@M is available:
Via the Internet:
www.endress.com/lifecyclemanagement
12.12 Certificates and approvals
For certificates and approvals valid for the device: see the data on the nameplate
Approval-related data and documents: www.endress.com/deviceviewer → (enter the
serial number)
Functional safety A SIL version of the device is optionally available. It can be used in safety equipment in
accordance with IEC 61508 up to SIL 2 (SC 3).
Please refer to Safety Manual FY01034K for the use of the device in safety
instrumented systems according to IEC 61508.