Endress+Hauser Prosonic Flow 90, Руководство по эксплуатации

Страница: 95 / 114

Proline Prosonic Flow 90 10 Technical data
Hauser 95
10 Technical data
10.1 Technical data at a glance
10.1.1 Application
• Measuring the flow rate of fluids in closed piping systems.
• Applications in measuring, control and regulation technology for monitoring
processes.
10.1.2 Function and system design
Measuring principle Prosonic Flow operates on the principle of transit time difference.
Measuring system The measuring system consists of a transmitter and sensors.
The following version is available:
• Version for installing in safe area
Transmitter:
• Prosonic Flow 90
Measuring sensors:
• Prosonic Flow P clamp-on version (for chemical and process applications)
for nominal diameters DN 50...4000
• Prosonic Flow W clamp-on version (water/wastewater applications)
for nominal diameters DN 50...4000
• Prosonic Flow U clamp-on version (water/ultra pure water applications)
for nominal diameters DN 15...100
dedicated for plastic pipes
• Prosonic Flow W Insertion version (water/wastewater applications)
for nominal diameters DN 200...4000
10.1.3 Input
Measured variable Flow velocity
(transit time difference proportional to flow velocity)
Measuring range Typically v = 0...15 m/s with the specified measuring accuracy for Prosonic Flow W/P
Typically v = 0...10 m/s with the specified measuring accuracy for Prosonic Flow U
Operable flow range Over 150 : 1
Input signals Status input (auxiliary input):
U = 3...30 V DC, R
i
= 5 k
Ω
, galvanically isolated.
Configurable for:
totalizer reset, measured value suppression, error message reset.