Endress+Hauser Proline t-mass 65, Руководство по эксплуатации

Страница: 88 / 122

Accessories Proline t-mass 65 PROFIBUS DP/PA
88 Hauser
8.3 Service-specific accessories
Accessory Description Order code
Applicator Software for selecting and sizing Hauser measuring
devices:
• Calculation of all the necessary data for identifying the
optimum flowmeter: e.g. nominal diameter, pressure loss,
accuracy or process connections
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related
data and parameters over the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
DKA80 - *
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software package,
test results can be imported into a database, printed and used for
official certification.
Contact your Hauser representative for more
information. 50098801
FieldCare FieldCare is Hauser's FDT based Plant Asset
Management Tool. It can configure all intelligent field devices in
your plant and supports you in managing them. By using status
information, it also provides a simple but effective means of
checking their health. Please refer to the
product page of the
Hauser Internet
page:
www.endress.com
FXA193 The FXA193 service interface connects the device to the PC for
configuration via FieldCare. FXA193 – *