Endress+Hauser Proline Promass F 200 HART, Руководство по эксплуатации, Страница: 57 / 158

Proline Promass F 200 HART Commissioning
Hauser 57
Parameter overview with brief description
Parameters Description Selection/
User entry
Factory setting
Assign current output 1-2 Select process variable for
current output. • Off (only for current
output 2)
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Current output 1: mass
flow
• Current output 2: off
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Outputs
– Low flow cutoff
– Simulation process
variable
Unit choose list Country-dependent:
• kg/h
• lb/min
Volume flow unit Select volume flow unit.
Result
The selected unit applies for:
– Outputs
– Low flow cutoff
– Simulation process
variable
Unit choose list Country-dependent:
• l/h
• gal/min (us)
Density unit Select the unit for density.
Result
The selected unit applies for:
– Outputs
– Low value partial filled
pipe detection
– High value partial filled
pipe detection
– Simulation process
variable
– Density adjustment (in the
Expert menu)
Unit choose list Country-dependent
• kg/l
• lb/cf
Corrected volume flow unit Select corrected volume flow
unit.
Result
The selected unit applies for:
– Outputs
– Low flow cutoff
– Simulation process
variable
Unit choose list Country-dependent:
• Nl/h
• Scf/min
Corrected volume flow
calculation Select the reference density
for calculating the corrected
volume flow. • Fixed reference density
• Calculated reference
density
Calculated reference density