manualshive.com logo in svg

Endress+Hauser Proline Promass F 200 HART, Руководство по эксплуатации, Страница: 16 / 158

Поделиться
Скачать
Endress+Hauser Proline Promass F 200 HART Скачать руководство пользователя страница 16

Storage and transport

Proline Promass F 200 HART

16

Hauser

5.3 

Packaging disposal

All packaging materials are environmentally friendly and 100% recyclable:
• Measuring device secondary packaging: polymer stretch film that conforms to EC Directive

2002/95/EC (RoHS).

• Packaging:

– Wood crate, treated in accordance with ISPM 15 standard, which is confirmed by the affixed

IPPC logo.
or

– Carton in accordance with European Packaging Directive 94/62EC; recyclability is confirmed

by the affixed RESY symbol.

• Seaworthy packaging (optional): Wood crate, treated in accordance with ISPM 15 standard, which

is confirmed by the affixed IPPC logo.

• Carrying and mounting hardware:

– Disposable plastic pallet
– Plastic straps
– Plastic adhesive strips

• Dunnage: Paper cushion

Содержание Proline Promass F 200 HART































































































































































Отзывы:

Нет отзывов