Electrical connection
Proline Promass F 200 HART
28
Hauser
7.2.1
Connecting the transmitter
10 (0.4)
mm (in)
20 mm
3 mm
A0013836
1. Loosen the securing clamp of the connection compartment cover.
2. Unscrew the connection compartment cover.
3. Push the cable through the cable entry . To ensure tight sealing, do not remove the sealing ring
from the cable entry.
4. Strip the cable and cable ends. In the case of stranded cables, also fit ferrules.
5. Connect the cable in accordance with the terminal assignment (
communication: When connecting the cable shielding to the ground terminal, observe the
grounding concept of the facility.
6. Firmly tighten the cable glands.
7.
NOTICE!
Housing degree of protection voided due to insufficient sealing of the housing. Screw
in the screw without using any lubricant. The threads on the cover are coated with a dry
lubricant.
Reverse the removal procedure to reassemble the transmitter.
Removing a cable
mm (in)
2
1
3 4
3 (0.12)
A0013835
►
To remove a cable from the terminal, use a slotted screwdriver to push the slot between the
two terminal holes while simultaneously pulling the cable end out of the terminal.
