Endress+Hauser Proline Promass E 100, Руководство по эксплуатации

Страница: 59 / 108

Proline Promass E 100 Modbus RS485 Commissioning
Hauser 59
Progress
Parameter overview with brief description
Parameter Description Selection/
User entry Factory setting
Installation direction Change the sign of the direction
of flow of the fluid.
• Flow in arrow direction
• Flow against arrow direction Flow in arrow
direction
Zero point
adjustment control Start the zero point adjustment. • Cancel
• Start Cancel
Progress 0…100 % 0
10.4.4 Configuring the totalizer
You can configure each totalizer in the three submenus Totalizer 1-3 .
Navigation path
"Setup" menu → Advanced setup → Totalizer 1-3
Structure of the submenu
Totalizer 1-3 → Assign process variable
Mass unit
Volume unit
Corrected volume unit
Totalizer operation mode
Failure mode
Parameter overview with brief description
Parameter Prerequisite Description
Selection/
User entry
Factory setting
Assign process
variable - Select process
variable for totalizer.
Result
The selection
determines the
choose list of the
Unit parameter.
• Off
• Mass flow
• Volume flow
• Corrected volume
flow

The range of
options
increases if
the measuring
device has one
or more
application
packages.
Mass flow
Mass unit The following option
is selected in the
Assign process
variable
parameter:
Mass flow
Select the unit for
mass.
Result
The selected unit is
taken from:
Mass flow unit
Unit choose list Country-dependent:
• kg
• lb