Endress+Hauser Proline Promag P 100, Руководство по эксплуатации

Страница: 29 / 48

Proline Promag P 100 Electrical connection
Hauser 29
Ground cable
Copper wire, at least 6 mm 2 (0.0093 in 2 )
7.3 Hardware settings
7.3.1 Setting the device address
EtherNet/IP
The IP address of the measuring device can be configured for the network via DIP switches.
Addressing data
IP address and configuration options
1st octet 2nd octet 3rd octet 4th octet
192. 168. 1. XXX
↓ ↓
Can only be configured via software addressing Can be configured via
software addressing
and hardware
addressing
IP address range 1 to 254 (4th octet)
IP address broadcast 255
Addressing mode ex works Software addressing; all DIP switches for hardware addressing are set to OFF.
IP address ex works DHCP server active
For device addressing via software (→  42)
Setting the address
OFF ON
1
2
3
4
5
6
7
8
9
10
1
2
4
8
16
32
64
128
- Write protection
- Default Ethernet
network settings
IP 192.168.1.212
IP
Address setting
(last octet)
A0017913