Technical data
Proline Promag 55 PROFIBUS PA
130
Hauser
10.1.11 Human interface
Display elements
• Liquid crystal display: illuminated, four lines with 16 characters per line
• Custom configurations for presenting different measured values and status variables
• 3 totalizers
• At ambient temperatures below –20 °C (–4 °F), the readability of the display may be impaired.
Operating elements
• Onsite operation with three optical sensor keys (
S
/
O
/
F
)
• Application-specific Quick Setup menus for straightforward commissioning
Language groups
Language groups available for operation in different countries:
• Western Europe and America (WEA):
English, German, Spanish, Italian, French, Dutch and Portuguese
• Eastern Europe/Scandinavia (EES):
English, Russian, Polish, Norwegian, Finnish, Swedish and Czech.
• South and East Asia (SEA):
English, Japanese, Indonesian
• China (CN):
English, Chinese
!
Note!
You can change the language group via the operating program "FieldCare".
10.1.12 Certificates and approvals
CE mark
The measuring system described in these Operating Instructions therefore complies with the legal
requirements of the EU Directives. Hauser confirms this by affixing the CE mark to it and
by issuing the CE declaration of conformity.
C-tick mark
The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
Ex approval
Information on the currently available Ex-rated versions (ATEX, FM, CSA, etc.) is available on
request from your Hauser sales outlet. All explosion protection data are given in a separate
documentation which is available upon request.
Sanitary compatibility
No applicable approvals or certification
Certification PROFIBUS
The flowmeter has successfully passed all the test procedures carried out and is certified and
registered by the PNO (PROFIBUS User Organization). The device thus meets all the requirements
of the following specifications:
• Certified in accordance with PROFIBUS Profile Version 3.0 (device certification number: available
on request)
• The measuring device can also be operated with certified devices of other manufacturers
(interoperability).
Pressure measuring device
approval
All measuring devices, including those with a nominal diameter smaller than or equal to DN 25,
correspond to Article 3(3) of the EC Directive 97/23/EC (Pressure Equipment Directive) and have
been designed and manufactured according to good engineering practice. For nominal diameters
greater than DN 25 (depending on the medium and process pressure), there are additional optional
approvals according to category II/III.
