Endress+Hauser Proline Cubemass 300, Описание параметров устройства

Страница: 44 / 294

Description of device parameters Proline Cubemass 300 Modbus RS485
44 Hauser
Additional parameters in the "Administration" submenu
Device reset 
Navigation  Expert → System → Administration → Device reset (0000)
Description Use this function to choose whether to reset the device configuration - either entirely or in
part - to a defined state.
Selection • Cancel
• To delivery set.
• Restart device
• Rest.S-DATBackup
Factory setting Cancel
Additional information Selection
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery set. Every parameter for which a customer-specific default setting was ordered is reset
to this customer-specific value. All other parameters are reset to the factory
setting.
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Rest.S-DATBackup Restore the data that are saved on the S-DAT. The data record is restored from the
electronics memory to the S-DAT.
Activate SW opt. 
Navigation  Expert → System → Administration → Activate SW opt. (0029)
Description Use this function to enter an activation code to enable an additional, ordered software
option.
User entry Max. 10-digit string consisting of numbers.
Factory setting Depends on the software option ordered
Additional information Description
If a measuring device was ordered with an additional software option, the activation code
is programmed in the device at the factory.
User entry
To activate a software option subsequently, please contact your Hauser sales
organization.
NOTE!