Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 18 / 64

Electrical connection Picomag IO-Link
18 Hauser
Current output configuration version
1
2
3
4
B A
L+
L-
A A
A0046581
 4 Current output, active, 4 to 20 mA
A Plug (measuring device)
B Socket (customer side)
L+ Supply v
L-
Supply voltage -
The current flows from the output to L-. The maximum load may not exceed 500 Ω. A
bigger load distorts the output signal.
Voltage output configuration version
1
2
3
4
B A
L+
L-
V V
A0046582
 5 Voltage output, active, 2 to 10 V
A Plug (measuring device)
B Socket (customer side)
L+ Supply v
L-
Supply voltage -
The voltage from the output applies to L-. The load must be at least 600 Ω. The output is
protected against short-circuiting and reverse polarity.
Digital input configuration version
• 15 V (switch-on threshold)
• 5 V (switch-off threshold)
1
2
3
4
B A
L+
L-
= =
A0033008
 6 Digital input
A Plug (measuring device)
B Socket (customer side)
L+ Supply v
L-
Supply voltage -