Endress+Hauser OUSAF11, Руководство по эксплуатации

Страница: 12 / 28

Installation OUSAF11
12 Hauser
5.1.2 Dimensions
139.0
(5.47)
135.5
(5.33)
149.1
(5.87)
2 1
3
38.1
(1.5)
A0021260
 4 Design and dimensions in mm (inch)
1 Submersible sensor
2 Tri-Clamp or VARIVENT process connection
3 Sensor with external thread
5.1.3 Mounting angles
The sensor can be installed up to the horizontal in an assembly, support or suitable process
connection. Other angles of inclination are not recommended.
Do not install the sensor vertically through the floor of a pipe. In this way, you avoid any
sedimentation and ensure a constant flow through the measuring gap. This guarantees
correct measured values and complete drainage in hygienic applications.