Endress+Hauser Nivector FTI26, Руководство по эксплуатации

Страница: 7 / 28

Nivector FTI26 Basic safety instructions
Hauser 7
2.4 Operational safety
L
CAUTION
Risk of injury!
‣
The operator is responsible for the trouble-free operation of the device.
‣
Operate the device only if it is in proper technical condition, free from errors and faults.
‣
The device must be operated with a 500 mA fine-wire fuse (slow-blow) which is
suitable for DC current in accordance with IEC 60127-2.
Modifications to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers:
‣
If, despite this, modifications are required, consult with Hauser.
Repair
To ensure continued operational safety and reliability:
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to the repair of an electrical device.
‣
Use original spare parts and accessories from Hauser only.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC
directives listed in the device-specific EC Declaration of Conformity. Hauser
confirms this by affixing the CE mark to the device.
2.6 IT security
Our warranty is valid only if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the device and associated
data transfer, must be implemented by the operators themselves in line with their security
standards.