Endress+Hauser Nanomass Gas Density Скачать руководство пользователя страница 14

Страница: 14 / 92

Storage, transportation, disposal of packaging

Nanomass Gas Density

Hauser

Storage, transportation, disposal of packaging

5.1

Storage conditions

Observe the following notes for storage:

• Store in the original packaging to ensure protection from shock.

• Do not remove protection caps mounted on connections.

They prevent any dirt from entering the micro-electro mechanical system (MEMS).

• Protect from direct sunlight to avoid unacceptably high surface temperatures.

• Select a storage location where moisture cannot collect in the measuring device as fungus

and bacteria infestation can damage the MEMS.

• Store in a dry and dust-free place.

• Do not store outdoors.

• Storage temperature

→



68.

5.2

Transporting the product

Observe the following during transport:

• Transport the measuring device to the measuring point in the original packaging.

• Do not remove protection caps mounted on connections. They prevent contamination of

the MEMS.

• Observe the transport instructions on the adhesive label on the packaging.

5.3

Disposal of packaging

All packaging materials are environmentally friendly and 100% recyclable:

• Measuring device secondary packaging:

– Polymer stretch wrap

– PE foam

• Protection caps on process connections: polymer LDPE

• Packaging: box in accordance with European Packaging Directive 94/62EC;

recyclability is confirmed by the affixed recycling symbol.

• Carrying and mounting hardware:

– Disposable plastic pallet

– Plastic straps

– Plastic adhesive strips

• Dunnage: paper cushion

Содержание Nanomass Gas Density





























































































Результаты поиска

Содержание Nanomass Gas Density

Отзывы:

Похожие инструкции для Nanomass Gas Density

Бренды по названию

Популярные бренды

Endress+Hauser Nanomass Gas Density, Руководство по эксплуатации

Результаты поиска

Содержание Nanomass Gas Density

Отзывы:

Похожие инструкции для Nanomass Gas Density

Бренды по названию

Популярные бренды