Endress+Hauser Micropilot M FMR230 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 104

background image

Safety instructions

Micropilot M FMR244 with FOUNDATION Fieldbus

4

Hauser

1

Safety instructions

1.1

Designated use

The Micropilot M FMR 244 is a compact radar level transmitter for the continuous, contactless
measurement of liquids, pastes and sludge. The device can also be freely mounted outside closed
metal vessels because of its operating frequency of about 26 GHz and a maximum radiated pulsed
energy of 1mW (average power output 1

µ

W). Operation is completely harmless to humans and

animals.

1.2

Installation, commissioning and operation

The Micropilot M has been designed to operate safely in accordance with current technical, safety
and EU standards. If installed incorrectly or used for applications for which it is not intended,
however, it is possible that application-related dangers may arise, e.g. product overflow due to
incorrect installation or calibration. For this reason, the instrument must be installed, connected,
operated and maintained according to the instructions in this manual: personnel must be authorised
and suitably qualified. The manual must have been read and understood, and the instructions
followed. Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.

1.3

Operational safety

1.3.1

Hazardous areas

Measuring systems for use in hazardous environments are accompanied by separate "Ex
documentation", which is an integral part of this Operating Manual. Strict compliance with the
installation instructions and ratings as stated in this supplementary documentation is mandatory.

• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local standards and regulations.

1.3.2

FCC approval

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

"

Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.

«
...
2
3
4
5
6
...
»

Содержание Micropilot M FMR230









































































































Отзывы:

Нет отзывов

Похожие инструкции для Micropilot M FMR230

Бренд: Accent Страницы: 36

Бренд: Omron Страницы: 36

Бренд: Olivetti Страницы: 39

Бренд: Xenith Страницы: 17

Бренд: AA Products Страницы: 8

Бренд: Bachmann Страницы: 2

Бренд: HAI Страницы: 2

Бренд: iDataLink Страницы: 30

Бренд: Kargo Master Страницы: 5

Бренд: Manfrotto Страницы: 2

Бренд: Quintex Страницы: 29

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 4

Бренд: Panasonic Страницы: 2

Бренд: XP-PEN Страницы: 3

Бренд: Dometic Страницы: 162

Бренд: Klarstein Страницы: 24

Бренд: SpectraLink Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды