Endress+Hauser Micropilot FMR20 Скачать руководство пользователя страница 7

Страница: 7 / 102

Micropilot FMR20 HART

About this document

Hauser

Document type "Safety Instructions"

Nominal pressure

MWP

MWP (Maximum working pressure/max. process pressure)

The MWP can also be found on the nameplate.

ToF

Time of Flight

FieldCare

Scalable software tool for device configuration and integrated plant asset management

solutions

DeviceCare

Universal configuration software for Hauser HART, PROFIBUS,

FOUNDATION Fieldbus and Ethernet field devices

DTM

Device Type Manager

(Dk value)

Relative dielectric constant

Operating tool

The term "operating tool" is used in place of the following operating software:

• FieldCare / DeviceCare, for operation via HART communication and PC

• SmartBlue (app), for operation using an Android or iOS smartphone or tablet

Blocking Distance; no signals are analyzed within the BD.

PLC

Programmable logic controller (PLC)

1.5

Registered trademarks

HART®

Registered trademark of the FieldComm Group, Austin, Texas, USA

Apple®

Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in

the U.S. and other countries. App Store is a service mark of Apple Inc.

Android®

Android, Google Play and the Google Play logo are trademarks of Google Inc.

Bluetooth®

The

Bluetooth®

word mark and logos are registered trademarks owned by the Bluetooth

SIG, Inc. and any use of such marks by Hauser is under license. Other trademarks

and trade names are those of their respective owners.

Содержание Micropilot FMR20







































































































Результаты поиска

Содержание Micropilot FMR20

Отзывы:

Endress+Hauser Micropilot FMR20, Руководство по эксплуатации, Страница: 7 / 102

Результаты поиска

Содержание Micropilot FMR20

Отзывы: