Endress+Hauser Memosens COS51E, Руководство по эксплуатации

Страница: 35 / 48

Memosens COS51E Repair
Hauser 35
L
CAUTION
The standard electrolyte is a strong irritant
Danger of severe skin and eye irritation!
‣
Be absolutely certain to observe the corresponding workplace safety regulations.
‣
Wear protective gloves and goggles when handling the electrolyte.
‣
In case of eye contact: Remove contact lenses, rinse eyes with water for a few minutes
and contact a doctor.
‣
In case of skin contact: Take off wet clothing immediately, wash the skin or take a
shower.
Also pay attention to the safety datasheet of the electrolyte on
www.endress.com/downloads .
1. Remove the sensor from the process and clean.
2.
A0046335
3.
A0046336
2. Unscrew the protection guard or cleaning unit.
3. Unscrew the membrane cap from the sensor head.
10.3.2 Replacing sealing rings
1. Remove the sensor from the process and clean it.
2. Disassemble the sensor →  35.