LT5
Maintenance
Hauser
83
9.4
Drive checker replacement (LT5-4/LT5-6)
The drive checker unit is an important mechanism for checking the performance of LT. It is
prone to wear and tear as it is used frequently. It is designed so that each part can be
replaced easily if it becomes worn.
Replacement procedure
1. Remove the LT rear cover and the tape drum.
2. Loosen the socket head screw on the check handle and remove the check handle.
3. Remove the gland clamp with a No. 46 spanner or a monkey wrench.
4. Remove the gland spring, collar and seal metal.
5. Pull out the check shaft towards the tape drum.
6. Once the part has been replaced, reassemble by following the above instructions in
reverse order.
7.
This completes the replacement process.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A0041248
66
Names of drive check unit parts
1
Tape drum
2
Check spring
3
Check boss
4
Spring
5
Spring set thread
6
Seal metal
7
O-ring
8
Gland clamp
9
O-ring
10 Check shaft
11 Gland spring
12 Socket head screw
13 Check handle
14 Collar
