Endress+Hauser LPGmass Скачать руководство пользователя страница 31

Страница: 31 / 36

LPGmass

Hauser

CSA

Currently, the following versions for use in hazardous areas are available:

IS (Ex i)

• Class I Division 1 Groups ABCD

• Class II Division 1 Groups EFG and Class III

Modbus RS485 certification

The measuring device meets all the requirements of the MODBUS/TCP conformity test and has the

"MODBUS/TCP Conformance Test Policy, Version 2.0". The measuring device has successfully passed

all the test procedures carried out.

Measuring instrument

approval

The measuring device is (optionally) approved as a gas meter (MI-002) or component in measuring

systems (MI-005) in service subject to legal metrological control in accordance with the European

Measuring Instruments Directive 2014/32/EU (MID).
The measuring device is qualified to OIML R117 and has an OIML Certificate of Conformity

(optional).

Ordering information

Detailed ordering information is available from the following sources:

• In the Product Configurator on the Hauser website:

www.endress.com

-> Click "Corporate"

-> Select your country -> Click "Products" -> Select the product using the filters and search field ->

Open product page -> The "Configure" button to the right of the product image opens the Product

Configurator.

• From your Hauser Sales Center:

www.addresses.endress.com

Product Configurator - the tool for individual product configuration

• Up-to-the-minute configuration data

• Depending on the device: Direct input of measuring point-specific information such as

measuring range or operating language

• Automatic verification of exclusion criteria

• Automatic creation of the order code and its breakdown in PDF or Excel output format

• Ability to order directly in the Hauser Online Shop

Accessories

Various accessories, which can be ordered with the device or subsequently from Hauser, are

available for the device. Detailed information on the order code in question is available from your

local Hauser sales center or on the product page of the Hauser website:

www.endress.com

Service-specific accessories

Accessories

Description

Applicator

Software for selecting and sizing Hauser measuring devices:
• Choice of measuring devices for industrial requirements
• Calculation of all the necessary data for identifying the optimum flowmeter: e.g.

nominal diameter, pressure loss, flow velocity and accuracy.

• Graphic illustration of the calculation results
• Determination of the partial order code, administration, documentation and

access to all project-related data and parameters over the entire life cycle of a
project.

Applicator is available:
• Via the Internet:

https://wapps.endress.com/applicator

• As a downloadable DVD for local PC installation.

Содержание LPGmass





































Результаты поиска

Содержание LPGmass

Отзывы:

Похожие инструкции для LPGmass

Бренды по названию

Популярные бренды

Endress+Hauser LPGmass, Руководство пользователя

Результаты поиска

Содержание LPGmass

Отзывы:

Похожие инструкции для LPGmass

Бренды по названию

Популярные бренды