Endress+Hauser Liquicap M FMI52, Краткое руководство по эксплуатации

Страница: 7 / 32

Liquicap M FMI52 HART Mounting
Hauser 7
4 Mounting
4.1 Mounting requirements
4.1.1 Mounting the sensor
The Liquicap M FMI52 can be installed vertically from above.
Make sure that:
• the probe is not installed in the area of the filling curtain
• the probe is not in contact with the container wall
• the distance from the container floor is ≥10 mm (0.39 in)
• multiple probes are mounted next to each other at the minimum distance between the
probes of 500 mm (19.7 in)
≥
500 (19.7)
A0040578
Unit of measurement mm (in)
4.1.2 Measuring condition
Measuring range L1 is possible from the tip of the probe to the process connection.