Endress+Hauser iTHERM TrustSens TM371, Руководство по эксплуатации

Страница: 6 / 106

Basic safety instructions iTHERM TrustSens TM371, TM372
6 Hauser
2 Basic safety instructions
2.1 Requirements for personnel
The personnel for installation, commissioning, diagnostics and maintenance must fulfill
the following requirements:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣
Are authorized by the plant owner/operator.
‣
Are familiar with federal/national regulations.
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the
application).
‣
Follow instructions and comply with basic conditions.
The operating personnel must fulfill the following requirements:
‣
Are instructed and authorized according to the requirements of the task by the facility's
owner-operator.
‣
Follow the instructions in this manual.
2.2 Intended use
• The device is a compact thermometer for the acquisition and conversion of temperature
input signals for industrial temperature measurement.
• The manufacturer is not liable for damage caused by improper or non-intended use.
2.3 Operation safety
NOTICE
Operation safety
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
‣
If, despite this, modifications are required, consult with Hauser.
Repair
Due to its design, the device cannot be repaired.
‣
However, it is possible to send the device in for examination.
‣
To ensure continued operational safety and reliability, use original spare parts and
accessories from Hauser only.
2.4 Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC
directives listed in the device-specific EC Declaration of Conformity. Hauser
confirms this by affixing the CE mark to the device.