Endress+Hauser Fieldgate FXA720, Руководство по эксплуатации

Страница: 31 / 66

Fieldgate FXA720 6 Configuring the Web Server
Hauser 29
6 Configuring the Web Server
Note!
• For security reasons, Fieldgate will automatically logout of the Specialist mode if it registers no
activity in the User Interface for a period of two minutes.
• You cannot change device parameters with the Fieldgate Web Server. This requires the help of
a configuration tool, e.g. FieldCare, that uses Fieldgate as a pass-through interface
6.1 Logging on
Once the IP address has been entered in your web browser and the connection made, you are
prompted to enter a user role and the password.
Note!
• All Fieldgate FXA720 passwords are case sensitive
Fig. 6-1: User login dialogue
User roles and default
passwords
Table 7.1 lists the user roles with passwords that are currently available in the Fieldgate. Security
Setup, Chapter 6.5, provides more information on setting up passwords etc.
Table 6-1: Fieldgate user roles and rights
Logging off
In specialist mode, click on the
"Logout"
link then close the internet browser. In user mode, close
the internet browser.
Role User name Default
password
Rights
Administrator admin super Can access Fieldgate in both User and and Specialist mode:
• Can configure network settings
• Can set all passwords and user IDs
• Can change visualisation page settings
• Can set events, alarms, e-mail and time parameters
• Can configure PROFIBUS settings
• Can set special page options
• Can reset Fieldgate to factory settings
Maintenance maint great Can access Fieldgate in both User and and Specialist mode:
• Can configure PROFIBUS settings
• Can reset Fieldgate to factory settings
Executive exec superb Can access Fieldgate in User Mode only
• Can view any page with the exception of the factory, communication
and special settings, but has no rights to change parameters