Endress+Hauser Fieldgate FXA520, Руководство по эксплуатации

Страница: 49 / 108

Fieldgate FXA520 5 Commissioning
Hauser 47
5.4.2 Set up the Fieldgate via service interface
The Fieldgate must be installed and powered up.
Do not
insert the SIM card until you are instructed
to do so!
1 Press
Switch to Administration Mode
Now press
Settings
followed by
Network
– In the
GSM Setup
dialog enter the SIM Card PIN, e.g. 6348, see Table 5-4
(
Caution:
The entry is hidden, default 8080 – make sure that Caps Lock is not active!!)
– Press
"Send"
to download the parameters to the Fieldgate
– Now set up the dial-up connection in your computer, see Chapter 5.4.3
Note!
– If the desired provider is set manually, Fieldgate attempts to make contact as normal
– If contact fails, Fieldgate falls back to automatic mode: an entry is made in the modem log
"cannot connect to selected GSM operator connected to: <GSM_Provider>"
– If a "foreign" provider is contacted in Auto mode, it is not possible to build up a GPRS
connection, only a GSM connection
– Fieldgate continues to search for the manually selected provider at regular intervals
2 If are using GPRS, scroll down to the
GPRS Setup
dialog, otherwise configure Fieldgate to dial
up with the
Dial-up Setup
as described in Chapter 5.3.2.
– Enter the parameters as appropriate, see Table 5-5
(The screenshot above is an example for Swisscom Mobile)
– Press
"Send"
to download the parameters to the Fieldgate
– Do not activate "GPRS Dail In Permanently" until you have tested the connection!
3 If you want to use a dynamic DNS server, scroll down to the
DynDNS Setup
dialog
(for more information on Dynamic DNS servers see Chapter 8.6):
– Enter the parameters as appropriate, see Table 5-6
(Example for dyndns.org is:
<username>
:
<password>
@members.dyndns.org/nic/
update?system=dyndns&hostname=
<hostname>
&myip=
where
<username>
,
<password>
and
<hostname>
are allocated when you register)
– Press
"Send"
to download the parameters to the Fieldgate