Endress+Hauser Fieldgate FXA320, Руководство по эксплуатации

Страница: 98 / 106

Fieldgate FXA320 12 Appendix
Hauser 96
12 Appendix
12.1 Commissioning Fieldgate Ethernet via Web browser
NOTE!
• The following procedure is for Windows XP : for other Windows operating systems, consult
your network administrator
• You require administration rights for your computer
• Only one Fieldgate in delivery status may be in the network (address conflicts!)
Before starting, the Fieldgate must either:
• be installed in the network connected to a switch/hub with a straight cable or
• be connected directly to the computer with a cross-link cable.
12.1.1 Change the IP address of your computer
Procedure 1 Right-click "Start => Settings => Control Panel => Network Connections" .
2 Right-click "Local Area Connection => Properties"
Using the left mouse button, double-click "Internet Protocol (TCP/IP)" or
click once, then click "Properties".
3 Note the current settings, for later use, then:
– Select Use following IP address
– Enter e.g. 192.168.252.2 (in this example, an address 192.168.253.2 – 254 is valid)
– Enter a subnet mask, e.g. 255.255.255.0
–
Click OK to confirm