Endress+Hauser Fieldgate FXA320, Руководство по эксплуатации

Страница: 22 / 106

Fieldgate FXA320 4 Hardware Installation
Hauser 20
4.1.3 Accessing the DAT module/SIM card/service interface
The DAT module, SIM card receptacle for GSM devices and service interface are located behind the
front panel. You require a screwdriver with a normal blade.
NOTE!
• Switch off the Fieldgate before inserting or removing the DAT module
•
Do not insert the SIM card until the Fieldgate GSM settings have been made, see Chapter 5.3
1 Insert the screwdriver blade in the slot provided for it and gentle prise the front panel forwards
until it is detached from its fastening.
2 Pull the panel downwards to access the connections.
3 Close the panel after use.
Fig. 4-3: Opening the front panel
4.1.4 Dismounting a Fieldgate
Dismounting 1 Switch off the power to the Fieldgate.
2 Insert a screwdriver blade between the terminal block and the housing and prise the block
from its socket.
–
Repeat for all terminal blocks.
3 Insert the screwdriver blade in snap fastener and prise downwards until the fastener releases
itself from the rail, then pull the Fieldgate free.
Fig. 4-4: Dismounting Fieldgate
L D
FXA320 Ethernet
Service interface
DAT
Component diagram
Device lock/reset
Prise open
Pull down
SIM card (GSM version)
Switch CH1, CH2
active/passive
2
b
b
a
a
3
OFF
1