Endress+Hauser dosimass, Руководство по эксплуатации

Страница: 6 / 58

Identification Dosimass
6 Hauser
2 Identification
2.1 Device designation
The Dosimass flow measuring system consists of a compact measuring device and is supplied as a
mechanical unit.
2.1.1 Nameplate
A0007262
Fig. 1: Nameplate specifications for the Dosimass transmitter (example)
1 Order code/serial number: see the specifications on the order confirmation for the meanings of the individual
letters and digits.
2 Power supply / power consumption
3 Process connection
4 Material
5 Maximum process temperature
6 Flow calibration factor
7 Reserved for information on special products
8 Ambient temperature range
9 Reserved for additional information on device version (approvals, certificates)
10 Degree of protection
11 Fluid flow direction
12 Cable temperature
2.2 Certificates and approvals
The devices are designed to meet state-of-the-art safety requirements, have been tested, and left the
factory in a condition in which they are safe to operate. The devices comply with the applicable
standards and regulations in accordance with EN 61010 "Protection Measures for Electrical
Equipment for Measurement, Control, Regulation and Laboratory Procedures".
The measuring system described in these Operating Instructions thus complies with the statutory
requirements of the EC Directives. Hauser confirms successful testing of the device by
affixing to it the CE mark.
The measuring system is in conformity with the EMC requirements of the "Australian
Communications and Media Authority (ACMA)".
2.3 Registered trademarks
TRI-CLAMP
®
Registered trademark of Ladish & Co., Inc., Kenosha, USA
FieldCare
®
, Fieldcheck
®
, Applicator
®
, HistoROM™
Registered or registration-pending trademarks of Hauser Flowtec AG, Reinach, CH
10
11
9
1
2
3
4
5
6
7
8
9
i
-20°C (-4°F) <Tamb<+60°C (140°F)
Materials:
TMmax.:
125°C/257°F
1.4539/904L
Order Code:
TAG No.:
Dn25 / 1” - 1” Triclamp
Ser.No.:
XXXXX-XXXXXXX
12345678901
ABCDEFGHJKLMNP
IP67 / NEMA/Type4X
4.3W
28 - 03
R
Ta+20°C/68°F
1.000 / 0
K-factor:
3.1, 0.8 / 150grit µm
DOSIMASS
N12895
24VDC nominal (20…30VDC)
12