Dosimag
Commissioning
Hauser
33
10.4.1 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a
unique designation using the
Device tag
parameter and thus change the factory setting.
• The number of characters displayed depends on the characters used.
• Enter the tag name in the "FieldCare" operating tool → 30
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter
Description
User entry
Factory setting
Device tag
Enter the name for the measuring point.
A maximum of 32 characters
such as letters, numbers or
special characters (e.g. @, %, /)
Dosimag
10.4.2 Setting the system units
In the
System units
submenu the units of all the measured values can be set.
Navigation
"Setup" menu → System units
‣
System units
Volume flow unit
Volume unit
Parameter overview with brief description
Parameter
Description
Selection
Factory setting
Volume flow unit
Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list
Country-specific:
• ml/s
• fl oz/s (us)
Volume unit
Select volume unit.
Unit choose list
Country-specific:
• ml
• fl oz (us)
