Deltapilot S
Hauser
23
Parameter description of the
SAFETY CONFIRM group –
"Level" operating mode
The numbers in brackets indicate the ID numbers of the parameters on the on-site display.
MEASURING MODE = Level, LEVEL SELECTION = Level Easy Pressure
Parameter name
Description
SAFETY LOCKSTATE
Displays the device status with regard to the safe measuring mode.
Possibilities:
• Unlocked
• Locked
Prerequisites:
• Operating tool or handheld terminal 375 Field Communicator
SAFETY LOCK (836)
This parameter offers the following functions:
– Check and lock the device for the safe measuring mode.
16 ff for operation via the on-site display or handheld terminal
375 Field Communicator and
18 ff for operation via operating tool.
– Disable the lock on the safe measuring mode.
27, "Locking/Unlocking" section.
– On-site display: Displays the device status with regard to the safe measuring mode.
SAFETY PASSWORD (838)
The password has to be entered in the following instances:
– Prior to querying safety related parameters
16 ff for operation via the on-site display or handheld terminal
375 Field Communicator and
18 ff for operation via operating tool.
– When unlocking the safe measuring mode.
27, "Locking/Unlocking" section.
DIGIT SETS (841)
This parameter is used to check whether the characters and digits are displayed correctly
on the user interface. If the characters and digits are displayed correctly, this parameter
displays the character string "0123456789.-".
Options:
• Valid: Select this option if the string of characters and digits is displayed correctly.
• Not valid: Select this option if the string of characters and digits is not displayed
correctly. In this case, operation in the safe measuring mode is not possible.
OUTPUT CURRENT (875)
For displaying and querying the settings for the CURR. CHARACT., OUTPUT FAIL
MODE, ALT. CURR. OUTPUT, SET MAX. ALARM, SET MIN. CURRENT parameters.
Once you have entered the password correctly for the SAFETY PASSWORD parameter,
the following parameters - among others - are reset to the factory setting:
– CURR. CHARACT. = linear
– OUTPUT FAIL MODE = max. alarm
– ALT. CURR. OUTPUT = normal
– SET MAX. ALARM = 22 mA
– SET MIN. CURRENT = 3.8 mA
– ALARM DELAY = 0 s
– ALARM DISPLAY TIME = 0 s
The OUTPUT CURRENT parameter displays these factory values as "LinMaxNorm22/
3.8/0s".
Options:
• Valid: Select this option if the factory values displayed correspond to the desired values.
• Not valid: Select this option if the factory values displayed do not correspond to the
desired values. In this case, operation of the device in the safe measuring mode is not
possible.
Содержание Deltapilot S FMB70
Страница 30: ...Deltapilot S 30 Endress Hauser Management summary Management_summary exida_2 Management_summary exida_1 ...
Страница 31: ...Deltapilot S Endress Hauser 31 Management_summary exida_3 ...
Страница 32: ...Deltapilot S 32 Endress Hauser Certificate TUEV_en ...
Страница 33: ...Deltapilot S Endress Hauser 33 ...
