Endress+Hauser Deltabar S FMD77 Скачать руководство пользователя страница 34

Страница: 34 / 114

Operation

Deltabar S FMD77, FMD78, PMD75 with FOUNDATION Fieldbus

Hauser

Operation

Feature 20 "Output; operation" in the order code provides you with information on the

operating options available to you.

6.1

Onsite display (optional)

A 4-line liquid crystal display (LCD) is used for display and operation. The onsite display

shows measured values, fault messages and notice messages. The display of the device can

be turned in 90° steps. Depending on the orientation of the device, this makes it easy to

operate the device and read the measured value.
Functions:

• 8-digit measured value display including sign and decimal point, unit display

• Bar graph as graphic display of the current pressure measured value in relation to the set

pressure range in the Pressure Transducer Block. The pressure range is set by means of the

SCALE_IN parameter.

• Easy and complete menu guidance by dividing the parameters into several levels and

groups

• Menu guidance

The onsite display is available in English. Needless to say, the device can also be operated

in 6 languages (de, en, fr, es, jp, ch) via the DTM or EDD. The FieldCare program is an E+H

DTM operating tool and can be acquired from endress.com.

• Each parameter has a 3-digit ID to aid navigation

• Option of configuring the display according to individual requirements and preferences,

such as alternating display, contrast setting, display of other measured values such as

sensor temperature

• Comprehensive diagnostic functions (fault and warning message, maximum indicator,

etc.)

• Rapid and safe commissioning using Quick Setup menus

Versions in the order code

Operation

FOUNDATION Fieldbus; external operation, LCD

Via onsite display and 1 key on the exterior of
the device

FOUNDATION Fieldbus; internal operation, LCD

Via onsite display and 1 key on the inside of the
device

FOUNDATION Fieldbus; internal operation

Without onsite display, 1 key on the inside of

the device

Содержание Deltabar S FMD77



















































































































Результаты поиска

Содержание Deltabar S FMD77

Отзывы:

Похожие инструкции для Deltabar S FMD77

Бренды по названию

Популярные бренды

Endress+Hauser Deltabar S FMD77, Руководство по эксплуатации

Результаты поиска

Содержание Deltabar S FMD77

Отзывы:

Похожие инструкции для Deltabar S FMD77

Бренды по названию

Популярные бренды