Endress+Hauser Deltabar S FMD77 Скачать руководство пользователя страница 110

Страница: 110 / 114

Diagnostics and troubleshooting

Deltabar S FMD77, FMD78, PMD75 with FOUNDATION Fieldbus

110

Hauser

9.9

Repair of Ex-certified devices

WARNING

Limitation of electrical safety due to incorrect connection!

Risk of explosion!
When repairing Ex-certified devices, please note the following:

• Only specialist personnel or Hauser may undertake repairs of certified devices.

• Relevant standards, national hazardous area regulations and Safety Instructions and

Certificates must be observed.

• Only genuine Hauser spare parts may be used.

• When ordering spare parts, please check the device designation on the nameplate.

Identical parts may only be used as replacements.

• Electronic inserts or sensors already in use in a standard instrument may not be used as

spare parts for a certified device.

• Carry out repairs according to the instructions. After repairs, the device must fulfill the

requirements of the specified individual tests.

• A certified device may only be converted into another certified variant by Hauser.

• All repairs and modifications must be documented.

9.10

Spare Parts

• Some replaceable measuring device components are identified by means of a spare part

nameplate. This contains information about the spare part.

• All the spare parts for the measuring device along with the order code are listed In the

W@M Device Viewer (www.endress.com/deviceviewer) and can be ordered. If available,

users can also download the associated Installation Instructions.

Measuring device serial number:

• Located on the device and spare part nameplate.

• Can be read out via the "DEVICE SERIAL No" parameter in the "TRANSMITTER DATA"

submenu.

9.11

Return

The measuring device must be returned if repairs or a factory calibration are required, or if

the wrong measuring device has been ordered or delivered. According to legal regulations,

Hauser, as a ISO-certified company, is required to follow certain procedures when

handling returned products that are in contact with process fluids.

To ensure swift, safe and professional device returns, please read the return procedures and

conditions on the Hauser website at www.services.endress.com/return-material.

9.12

Disposal

When disposing, separate and recycle the device components based on the materials.

Содержание Deltabar S FMD77



















































































































Результаты поиска

Содержание Deltabar S FMD77

Отзывы:

Похожие инструкции для Deltabar S FMD77

Бренды по названию

Популярные бренды

Endress+Hauser Deltabar S FMD77, Руководство по эксплуатации

Результаты поиска

Содержание Deltabar S FMD77

Отзывы:

Похожие инструкции для Deltabar S FMD77

Бренды по названию

Популярные бренды