ControlCare Panel PC SPC350
5 Electrical Installation
Hauser
13
5.3
Power supply 19" monitor
Before connecting up:
• Check that the power supply has the correct voltage.
• Protective earth: Connect the grounding point on the housing to the cabinet earth.
A M4x10 grounding point is to be found on the lefthand side of the housing, see Fig. 5-3.
Fig. 5-3: Power connections, 19" monitor
5.3.1
230 VAC plug connector
IEC 320 connector receptacle (3-pole, male C-14 connector)
To prepare the Panel PC for operation:
• Plug the IEC 320 connector on the detachable IEC cord set supplied into the receptacle on the
rear of the housing.
• Plug the line connector at the other end of the cord set into a line socket with a functioning
ground contact.
The AC/DC power pack requires a power supply of 230 VAC (90...260 VAC), autorange
Grounding point
Power supply
230 VAC:
IEC C-14 male connector
M4x10
Power
supply
Grounding point
