Endress+Hauser Conducal CLY421, Руководство по эксплуатации

Страница: 8 / 24

Device description and operation Conducal CLY421
8 Hauser
3.2 Operation
3.2.1 Rechargeable battery
You must charge the lithium ion battery before you connect the calibration kit.
1. Insert the round connector of the power supply cable into the power supply connection
on the right-hand side of the case.
2. Insert the mains plug of the power supply cable into the socket.
3. The lithium ion battery will now be charged.
The light emitting diode on the charger can indicate two charge states:
•
Orange : The battery is being charged.
• Green : The battery is fully charged.
It can take several hours to charge the battery.
3.2.2 Operating concept of the transmitter
a0010027
Fig. 3: Press the soft key: select the menu directly
a0010035-en
Fig. 4: Turn the navigator: move the cursor in the menu
a0010036-en
Fig. 5: Press the navigator: select a function
a0010037-en
Fig. 6: Turn the navigator: change a value
a0010038-en
Fig. 7: Press the navigator: accept new value
Operating concept
1. Select a menu directly by pressing the
appropriate soft key.
2. Move the cursor in the menu by turning the
navigator.
3. Select the desired function by pressing the
navigator.
4. Change the value by turning the navigator.
5. Accept the new value by pressing the navigator.