Endress+Hauser CLS15D, Руководство по эксплуатации

Страница: 17 / 32

Condumax CLS15D/16D/21D Electrical connection
Hauser 17
The Dipfit CLA111 immersion assembly is available for installing sensors with G1 thread in
vessels.
A B D
A0024145
 7 Installation in Dipfit CLA111 immersion assembly, fastening versions A, B and D
Ensure that the electrodes are fully immersed in the medium during measurement.
4.2 Post-installation check
1. Are the sensor and cable undamaged?
2. Is the sensor installed in the process connection and is not suspended from the cable?
5 Electrical connection
L
WARNING
Device is live!
Incorrect connection may result in injury or death!
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior to commencing connection work, ensure that no voltage is present on any cable.