Cleanfit P CPA472D
Identification
Hauser
7
2.3
Product structure
Drive type and limit contact switches
A
Manual without limit contact switches
B
Pneumatic without limit contact switches
C
Pneumatic with 2 pneumatic limit contact switches
D
Pneumatic with 2 electric Ex limit contact switches
E
Pneumatic with 1 electric Ex limit contact switch
Assembly version
1
Service position
2
Service po measuring position
Electrode type
A
For gel electrodes / ISFET sensors, 225 mm
B
For gel electrodes, 360 mm
C
For liquid KCl electrodes, 360 mm
Immersion depth
1
max 148 mm (5.83")
2
max 280 mm (11.02")
Assembly material (in contact with medium)
B
In contact with medium: PEEK
C
In contact with medium: PVDF
D
In contact with medium: PVDF, conductive
E
In contact with medium: PVDF, electrode holder Hastelloy C4
F
In contact with medium: Hastelloy C4
G
In contact with medium: Titanium
H
In contact with medium: Stainless steel 1.4571; 316Ti
Seal material (in contact with medium)
2
FPM Viton
®
3
FFKM KALREZ
®
Process connection
D
DN 50 flange (acc. to EN 1092), stainless steel
E
DN 80 flange (acc. to EN 1092), stainless steel
F
2" ANSI flange, stainless steel
G
Thread G1¼ internal (only with materials F/G/H)
Y
Special version acc. to customer specification
Rinse connection
1
Without rinse connection
3
With rinse fitting 2 x G ¼ internal thread
4
With rinse fitting 2 x NPT ¼" internal thread
5
With rinse fitting 2 x pipe 8x60 mm Swagelok
CPA472D-
complete order code
