Endress+Hauser CE 4, Руководство по эксплуатации

Страница: 29 / 36

CE 4 Technical Data
Hauser 29
10 Technical Data
10.1 Inputs
10.1.1 Measurement type and range
10.2 Outputs
10.2.1 Output signal
Liquisys M transmitter
Current output 4 to 20 mA
ASP-Station 2000 water sampler
3 relay outputs max. 250 V/3 A
Alarm output
Fault event outputs using a potential free contact (cummulative alarm)
Hauser
Sensor type Measurement Ranges
pH sensor CPS11 pH value and temperature pH: 1 to 12
temperature: -15 to 80 °C
Redox sensor CPS12 Redox potential -1000 mV to +1000 mV
Conductivity sensor
CLS 21 Conductivity 10
µ
S/cm to 20 mS/cm
Oxygen sensor COS41 Dissolved oxygen 0.05 mg/l to 20.0 mg/l
Turbidity sensor
CUS41 Turbidity 0.00 to 9999 FNU
0.00 to 9000 ppm
0.0 to 300.0 g/l
0.0 to 200.0 %
Turbidity sensor
CUS31 Turbidity for drinking water applications 0.000 to 9999 FNU
0.00 to 3000 ppm
0.0 to 3.0 g/l
0.0 to 200.0 %
Optionally:
Nitrate sensor CNS 70
and nitrate transmitter
CNM 750 Nitrate 0 to 25 mg/l
N
25 to 50 mg/l
N
SAC sensor CSS 70
and SAC transmitter
CSM 750 Spectral Absorption Coefficient (SAC) 0.3 to 50 m
-1
15 to 700 m
-1
Chlorine sensor CCS
140/141 and armature
CCA 250 Chlorine
•
Chlorine sensor CCS 140:
0.05 to 20 mg Cl
2
/l
•
Chlorine sensor CCS 141:
0.01 to 5.0 mg Cl
2
/l