Endress+Hauser ASP Inline, Руководство по эксплуатации

Страница: 42 / 80

Commissioning ASP Inline
42 Hauser
5.3 Local operation
5.3.1 Enable configuration
If necessary, enter the 4-character user code (see Section 5.3.2).
5.3.2 Lock configuration
Configuration of the ASP Station can be locked by entering a 4-character user code at the control
console (see ’Description of device functions’ in the ASP Station 2000 operating instructions.)
The user code is entered in the SET - DEVICE SETTINGS menu level under the CODE function.
5.4 Confirmation of error messages
Acknowledge error messages on the control unit display by pressing the operating key beneath the
OK field.
5.5 Communication via PC software
ReadWin
®
2000
The ASP Station 2000 can also be remotely configured and measured values accessed using a PC
with the Hauser operating software ReadWin
®
2000. ReadWin
®
2000 is a universal PC
programme for remote device operation. The interface for remote configuration is the RS232
connection socket.
!
Note!
Detailed information for configuring the device using the PC operating software ReadWin
®
2000
can be found in the accompanying operating instructions.
6 Commissioning
6.1 Function check
If you can answer YES to the following questions, then the device can be put into operation. If the
answer is NO, then please refer to the appropriate sections:
6.2 Switching on the assembly
After the pneumatics are connected and the assembly is wired to a control unit, the device is
operational.
General Section reference
Is the ASP Inline assembly correctly installed?
Æ
Section 3.3.2
Are the ASP Inline pneumatics connected correctly?
Æ
Section 3.3.3
Is the drain hose correctly routed from the ASP Inline to the sampling
vessel/sampler?
Æ
Section 3.3.4
Is the ASP Inline correctly wired to the ASP Station 2000 or to another
control unit?
Æ
Section 4.1.1 and chapter 4.1.2