qTOWER³ / qTOWER³ G
Design and function
13
The mains connection and the power switch are located on the device rear.
The interface for connection to the PC is also located on the device rear.
1
2
3
4
5
6
7
8
Figure 3 Back
1 Ventilation for fluorescence spectrome-
ter
2 Ventilation grille on the thermal cycler
3 Service connection
4 Power connection
5 Fuse holder for device fuses
6 Mains switch
7 Type plate
8 Interface for the connection cable to the
connected PC
The voltage selector switch is located on the bottom of the device, behind a cover. It can
be used to adjust the operating voltage to the mains voltage.
Figure 4 Voltage selection switch on the bottom of the device
The following accessories are included in the delivery scope of the device:
¡
Power cable
¡
Connection cable for connecting to the PC
¡
CD or USB stick with qPCRsoft software, with manual for software and device
¡
Operating manual and software manual (print version)
¡
Packaging and packaging instructions