Biometra TOne
Security
9
2
Security
For your own safety and to ensure error-free and safe operation of the device, please
read this chapter carefully before commissioning.
Observe all safety instructions listed in this user manual and all messages and infor-
mation displayed on the monitor by the control and analysis software.
2.1
Safety labeling on the device
Warning and mandatory action labels have been attached to the device and must al-
ways be observed.
Damaged or missing warning and mandatory action labels can cause incorrect ac-
tions leading to personal injury or material damage. The labels must not be removed.
Damaged warning and mandatory action labels must be replaced immediately!
The following warning and mandatory action labels have been attached to the de-
vice:
Warning symbol
Meaning
Comment
Warning of a danger
point
Proceed with care when handling bio-
logical and biochemical samples and
when working on the device.
Warning against hot
surface
There is a risk of burning at the heated
lid, the thermal block, the samples,
and the rear of the device.
Mandatory signs/
information sym-
bols
Meaning
Comment
Symbol for waste
disposal in accordance
with the WEEE directive
Do not dispose of the device as house-
hold waste.
CE marking
For People's Republic of
China only
The device contains controlled sub-
stances. Analytik Jena GmbH guaran-
tees that these substances will not es-
cape in the next 25 years if the device
is only used for the intended purpose.
Ensure ventilation slots
are unobstructed
Ensure that the ventilation slots on
the underside and at the rear of the
device are unobstructed. Make sure
that there are no objects underneath
the device, e.g., paper that may be
drawn against the ventilation slot and
thus interfere with ventilation.
