Endress+Hauser Analytik Jena TOPwave Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 79

Endress+Hauser Analytik Jena TOPwave Скачать руководство пользователя страница 49

TOPwave

Operating

49

6.6

Data export using USB



Press [D

ATA

] in the Main menu and then [

FILE MANAGER

]

for exporting digestion re-

ports.

The F

ILE

M

ANAGER

menu appears. All saved data incl. txt-files can be exported to Excel or

a similar program.



Connect an USB-stick to the USB-port and then push [USB].

In the next menu you can delete all data from the stick, copy all data from the control

unit to the stick and remove the stick. Observe all status signaling on the right above.
Observe that you can use only the same stick. Switch off the control unit and then switch
it on again if you want to copy data on a 2nd stick.
The digestion data are stored in a binary format which can only be read by means of the

TOPwave control unit. Besides, all data are also stored in txt format, which can then be
imported to Excel or Word on your computer.
Only this text file is copied by using USB stick.

«
...
47
48
49
50
51
...
»

Содержание Analytik Jena TOPwave
















































































Отзывы:

Нет отзывов