Basic information
multi N/C 2100S (duo, pharma)
8
NOTICE
Provides information on potential material or environmental damage.
1.2
Analyzer area of application
¡
multi N/C 2100S pharma: Special model for pharmaceutical total nitrogen analysis
The special vaccine analyzer provides quick and fully automatic total protein analysis. It
is used to quantify attenuated or devitalized viruses or bacteria, as well as antigenes in
pharmaceutical quality control.
This model is alway supplied with a chemiluminescence detector (CLD). It does not in-
clude an NDIR detector for carbon detection. The control and analysis software provides
complete data integrity and conforms to the pharmaceutical guidelines in 21 CFR
Part 11 and EudraLex Volume 4 Annex 11.
¡
Use in water treatment
The device can be used for both drinking water and waste water analysis in communal
and industrial treatment systems. Complex water bodies containing particles or salt can
also be safely analyzed.
¡
Use in environmental monitoring
Surface waters such as seawater often have low TOC content with high TIC concentra-
tions and high salinity. These difficult samples can be analyzed thanks to special analysis
modes (NPOC plus).
¡
Use in power plants and laboratories
With its dynamic measurement range, the analyzer provides TOC detection for power
plants and in industrial steam production.
¡
Analysis of waste and soil samples
Carbon detection (TC/TOC detection) in solid samples is possible by adding a solids
module to the device. Additionally, eluates can be analyzed. In these and other liquid
samples, TC and TN
b
can be determined simultaneously.
¡
Use in research and education
Due to its many configuration options, the analyzer is suitable for research and educa-
tion. TC and TOC can be determined in solids in conjunction with a solids module.
1.3
Intended use
The device and its components may only be used for the analyses listed in the user man-
ual. Only this specified use is regarded as the intended use, ensuring the safety of the
user and the device.
The analyzer may only be used to determine the total carbon content and the concen-
tration of organic and inorganic bound carbon in aqueous samples.
The analyzer is particularly suited for detection of the listed parameters in drinking wa-
ter, ground water, surface water, ultrapure water and water for pharmaceutical pur-
poses.
When equipped with a nitrogen detector, the analyzer can be used to examine the nitro-
gen content in aqueous samples.
