Endace Measurement Systems Limited
http://www.endace.com
EDM01.05-04r1 DAG 3.6GE User Manual
Copyright, all rights reserved.
5
Revision 7. 22 September 2005.
2.0 INSTALLING DAG 3.6GE CARD
Introduction
The DAG 3.6GE card can be installed in any free Bus Mastering PCI slot.
Although the driver supports up to four DAG cards by default in one
system, due to bandwidth limitations there should not be more than one
card on a single PCI-bus.
The cards make very heavy use of PCI-bus data transfer resources. This is
not usually a limitation as for most applications a maximum of two cards
only can be used with reasonable application performance.
In this chapter
This chapter covers the following sections of information.
•
Insert DAG 3.6GE Card into PC
•
Connect DAG 3.6GE Card Ports
•
DAG 3.6GE Card Sensitivity
2.1 Insert DAG 3.6GE Card into PC
Description
Inserting the DAG 3.6GE card into a PC involves accessing the bus slot,
fitting the card, and replacing the bus slot screw.
Procedure
Follow these steps to insert the DAG 3.6GE card into a PC.
Step 1.
Access bus Slot
Power computer down.
Remove PCI-bus slot cover.
Step 2.
Fit Card
Insert into PCI-X bus slot.
Step 3.
Replace bus Slot Screw
Secure card with screw.
Step 4.
Power up Computer
