POLYCOM 650 Quick User Guide
Page 1
PLACING A CALL
Using the Handset:
Pick up the handset, and then dial the number. Or, dial the number first, and
then pick up the handset.
Using the Speakerphone:
Press the
Speaker
key, then dial the number. Or press the
Line
key
and dial the number. (there may be up to a 4 second delay before the phone starts the call)
ANSWERING A CALL
Handset:
Pick up the handset.
Speakerphone:
Press
Speaker
or
Line
key, or the
Answer
soft key.
**
Incoming calls may be denied by pressing the
Reject
soft key during ringing.** The call will go to
Voice Mail
ENDING A CALL
Depending on the call mode Press:
Speaker
or hang up the handset. Or, Press the
EndCall
soft key
REDIAL
Press the
Redial
key to dial the most recently dialed number, or use *69
CALL HOLD AND RESUME
ring a call press the
Hold
button. To resume the call, press the
Resume
soft key, the
Line
key, or the
Hold
button.
During a call press the
Hold
button. To resume the call, press the
Resume
soft key, the
Line
key, or the
Hold
button
CALL TRANSFER
During a call press the
Trnsfr
soft key (the active call is placed on hold).
** Two transfer types are available:
Normal
and
Blind
**
Normal:
Dial the extension of the party to which you want to transfer the call, press
Dial
or
#
.
After speaking with the second party press the
Trnsfr
soft key to complete the transfer.
Blind:
Place a call to the party to which you want to transfer the call, press
Dial
or
#
, then hang
up
VoiceMail
: press the
Trnsfr
key, press
Blind
, then dial *99 and the number you wish to transfer
the call to, followed by the # key.
LOCAL CONFERENCE CALLS
To create a three way local conference call:
1. Connect to the first party.
2. Press the
Conference
button or the
Confrnc
soft key to create a new call (the active call is
placed on hold).
3. Dial the number that you would like to conference in and press
Send
to place a call to the second
party.
4. When the second party answers press the
Confrnc
soft key again to join all parties in the
conference.
Terminate a conference call by pressing
End Call
soft key
Conference Behavior:
• Pla
cing the conference call on hold will place the other conference parties on hold.
• Pla
cing the conference call on hold will place the other conference parties on hold.
