3
www.encore-usa.com
B — Hardware Installation
1.
Shut down your computer, and then, disconnect your computer’s power cord.
2.
Open the case of your computer
3.
Locate an empty PCI-E slot. Make sure the wireless adapter can fit.
4.
Insert the wireless adapter firmly into the empty PCI-E slot.
5.
Put the cover back to your computer case.
6.
Attach the external antennas to the connectors on the back of your wireless adapter.
Note:
The
N150
Series only has
one
antenna.
7.
Reconnect the power cord, and then, turn on your computer.
C — Software Installation
1.
Click “
Cancel
,” if you see the ‘
Found New
Hardware Wizard
’ window when you start
Windows for the first time after installing the
hardware.
2.
Insert the ‘
Installation CD
” to the CD-ROM drive. Depending on your computer’s
configuration, one of the following 3 scenarios will happen (A , B or C).
A.
The ‘
Encore Welcome Window
’ appears automatically, and then, the window
switches to the ‘
Quick Setup
’ window in
Step 3
.
B.
The ‘
AutoPlay
’ window appears automatically
If you see the ‘
AutoPlay
’ window instead, select
“
Run autorun.exe
.”
