background image

CE Declaration of conformity 

This equipment complies with the requirements relating to electromagnetic compatibility, EN 
55022 class A for ITE, the essential protection requirements of Council Directive 89/336/EEC 
on the approximation of the laws of the Member States relating to electromagnetic compatibility. 

 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if no installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
 

„

 

Reorient or relocate the receiving antenna. 

„

 

Increase the separation between the equipment and receiver. 

„

 

Connect the equipment into a different outlet from that the receiver is connected. 

„

 

Consult your local distributors or an experienced radio/TV technician for help. 

„

 

Shielded interface cables must be used in order to comply with emission limits. 

 
Changes or modifications to the equipment, which are not approved by the party responsible for 

compliance, could affect the user’s authority to operate the equipment. 
 
Copyright © 2002 All Rights Reserved.   
 
Company has an on-going policy of upgrading its products and it may be possible that 
information in this document is not up-to-date. Please check with your local distributors for the 
latest information. No part of this document can be copied or reproduced in any form without 
written consent from the company. 
 
Trademarks: 

All trade names and trademarks are the properties of their respective companies. 

 

Содержание ENH905














Отзывы: