Doc. No: 09900010
Revision: H
2 of 5
Issue Date: 11/05/21
FIGURE 3
INSTALLATION INSTRUCTIONS FOR GRAVITY FED EYEWASH
CAUTION: Adequate shelf or wall support is recommended.
Unit weighs in excess of 120 lbs (54.4 kg) when filled to capacity.
1. Inspect and rinse vessel, if necessary.
2. The unit may be mounted on a wall, on Encon transport cart, or as a stand-alone unit on a shelf. In both cases, the
eyewash heads should be 33” (83.82cm) to 45” (114.3cm) from the floor when in open position. When operating the top
of the eyewash pattern should reach between 33” (83.8cm) to 53” (134.6cm).
3. When mounting on a shelf, tray should be able to fully open without any obstacles.
4. When wall mounting, install “J” hook to proper support beam 49-61” (124.5-154.9cm) from the floor to the top of the “J”
hook, using proper mounting screws (mounting screws are not included). See Figure 1 on page 1 for reference.
5. When mounting on Encon transport cart, see Installation Instructions for Transport Cart on page 3.
6. Fill the vessel with potable water up to the appropriate fill-line and add Hydrosep
®
water preservative. Follow directions
on Hydrosep
®
container.
7. Pull down eyewash tray to activate and test unit for proper flow pattern.
