USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc.
For ENCOM PULSE Link Version 2.2.6
Page 97
TCP Client Mode
The TCP client/server mode is used to bridge two or more PULSE radio networks together. This
allows serial devices from different PULSE networks to talk to each other via an Ethernet network.
The following diagram shows a typical context in which iPULSE radios configured as TCP Clients
are used.
In this scenario, the radios configured as TCP client radios (iPULSE radio 2 and iPULSE radio 3)
establish a connection to the radio configured as a TCP Server (iPULSE radio 1) when data is
received from their respective PULSE radio networks. When the connection is established, any data
received from the client PULSE radio networks is passed on to the TCP Server, that forwards the
data to PULSE radio network 1.
Note that in this scenario, it is not possible for a serial device in PULSE radio network 2 to
communicate with a serial device in PULSE radio network 3 (and vice-versa).
Содержание iPULSE R
Страница 2: ......
